Forum Settings
       
This Forum is Read Only

RAM issue, maybeFollow

#1 Sep 05 2010 at 5:05 PM Rating: Decent
Scholar
**
771 posts
I built this computer awhile ago but I just realized my RAM is running as PC2-6400(400MHz)(according to Easy Tune 6) when it's PC2 8500 RAM... here is the RAM I have:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231166

And the motherboard:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813128376
#2 Sep 05 2010 at 5:11 PM Rating: Good
Scholar
*
213 posts
BRizzl3 wrote:
I built this computer awhile ago but I just realized my RAM is running as PC2-6400(400MHz)(according to Easy Tune 6) when it's PC2 8500 RAM... here is the RAM I have:


you will need to set it to its max rated speed in your bios, most ram doesnt run at its max speed unless you make it run at its rated spec.
#3 Sep 05 2010 at 5:12 PM Rating: Decent
**
423 posts
You can generally change that in the BIOS. If you don't know how to do that, the motherboard's documentation can help you.
____________________________
Esthalos of Fairy
Hume, rank 10, San d'Oria
BRD75, PLD67, WHM42, WAR37, NIN37, SMN20

Armant wrote:
ok let no say this again once...

U have 20 dmg, u shoot 30 dmg, but if ur not RNG, u want HALF, with no time reload, so u get 10. but, BUT, u want no DRG since ur shooting, so its 30 dmg or 10?
#4 Sep 05 2010 at 5:13 PM Rating: Decent
Scholar
**
771 posts
Thanks, I'm gonna try that right after I upgrade my BIOS(which I've been putting off). I'll post back when I'm done.
#5 Sep 05 2010 at 5:53 PM Rating: Decent
Scholar
**
771 posts
Okay so I have no idea what I'm doing with my ram, my CPU is OC'd so I have some experience with the BIOS but not much. Here are my settings right now:

CPU
CPU Clock Ratio - x10
CPU Frequency - 270
PCIE Frequency - Auto
HT Transport - Auto
NB - Auto

RAM
Memory Clock - x4(1080MHz)
The rest are defaults, don't know what to do with these
CAS Latency - 5T
RAS to CAS R/W Delay - 5T
Row Precharge Time - 5T
Minimum RAS Active Time - 15T
1T/2T Command Timing - 2T
TwTr Command Delay - 3T
Trfc0 for DIMM1 - 127.5ns
Trfc0 for DIMM2 - 127.5ns
Write Recovery Time - 6T
Precharge Time - 3T
Row Cycle Time - 25T
RAS to RAS delay - 3T

Voltage Control - Auto
#6 Sep 06 2010 at 8:24 AM Rating: Decent
Scholar
**
771 posts
Bump =)
This forum is read only
This Forum is Read Only!
Recent Visitors: 14 All times are in CST
Anonymous Guests (14)